TrekPow 350W Portable Lithium Battery Emergency Power Station, 296WH 80000mAh Solar Generator

Out of stock
$299.99 $269.99

Click Code

GY8PQZ4D

38% OFF + US$40

1:40 PM - 7:40 PM, April 9th

portable power station function

TrekPow 350W 80000mAh Portable Power Station is a Reliable Backup Battery for Outdoor Adventures and Unexpected Power Outage

Why Choose TrekPow Power Station?

 

  1. 296Wh 80000mAh Big Battery Capacity: Provide sufficient power to your devices during a power outage and road trip.
  2. 9 Outputs: You could power 9 pieces of equipment at the same time.
  3. Wireless Charging for Smartphone: Never worry about forgetting to take the phone charging cable on the trip.
  4. Safety Protection: Pure sine wave AC outlets will protect your sensitive devices.
  5. Always-ON: Short press the power button twice, the power station will not automatically turn off
  6. Pass-Through Charging: This power station has the ability to charge itself and charge devices via DC, USB ports, and the wireless charger at the same time. (Note: AC Ports DO NOT support this function)

 

Specifications

Capacity 296Wh 80000mAh
AC Output 110V/350W Pure Sine Wave
DC Output 12V/8A , 24V/3A
DC Input 12-25V
Car Outlet 12V 8A
Type C 18W
Working Temperature -10℃-40℃
Weight 6.6LB
power station features

FAQ:

Q1: What equipments can be powered by the TrekPow G300 power station?

A: Please note that the AC output port can only charge devices less than 350W 110V

DC output can charge devices less than 72W, DC output1(12V 8A), DC output2 (24V 3A)

Cigarette lighter port less than 12V 8A

Once exceeding, this portable power generator will into protection mode and shut down immediately.

Q2: How to calculate the runtime for devices?

Working time = 296Wh / Your device power, For example, Your device’s power is 30 watts. Then the working time= 296wh/30w=9.87hrs

We uploaded the G300 power station user manual that contains most information that you want to know. Any questions please feel free to send an email via TrekPow Support Email. Your satisfaction is the most important thing for us!

Package:

 

  • 1* TrekPow Portable Power Station (296Wh)
  • 1* Charger
  • 1* User Manual

 

SHIPPING

Last updated March 25, 2020.

Delivery times may be longer than usual due to the COVID-19 pandemic across the globe. We will arrange shipment as soon as the delivery industry gets back to normal.

Do not use delivery addresses for buildings that may be closed due to the current provisions (e.g. schools).

For any questions, please contact our customer service via the pop-up window on the page.


Shipping Fee

Free shipping on order of certain weight.


Shipping Orders

Normally orders will ship within 2-7 business days of processing payment, unless particularly noted else where on the website, at the time order is placed, or you receive an email notice that an item in your order has been delayed. Any expected delivery dates that may be given are only estimates. Orders can be delayed due to verification or the time the order has been placed. Orders may be delivered in separate shipments. All purchases through Taotronics.com are made pursuant to a shipment contract. This means that the risk of loss and title for such items pass to you upon tender of the item to the carrier.


30 Day Money-Back Guarantee for Any Reason

Undamaged products may be returned for a full refund for any reason within 30 days of purchasing. Once the returned item arrives back in TrekPow’ warehouse for inspection, the refund process will begin.

Pre Sale Questions

we offer US,UK,CA,ES,DE,FR,JP shipping currently and some countries orders on TrekPow.com enjoy free worldwide shipping
We will arrange to ship your order within 24 hours.
To check the progress of your order, please log into your account and go to the online Order Status to see the status bar in the Order Details page.
Offer cannot be combined with any other discounts nor promotions. We can only apply on discount and/or coupon to an order.
Unfortunately, we cannot change the delivery address once the product is en route.

Most Asked Technical Questions

1.Turn on your TrekPow jump starter and make sure it is over 50% charged (Press the power button to check the battery level). 2.lnsert jumper cables into jumping port and make sure the cable indicator is off. 3.Connect red damp to positive (+) terminal and black clamp to negative (-) of the car battery. 4.Start your engine while the cable indicator shows that the red/green light flashes alternately. 5.After successfully jump starting. unplug the jumper cables within 30 seconds. 6.Promptly remove clamps from the car battery and put it in the storage bag.
1.Connecl the devices (phones,tablets,etc) to the uSB port of the jump starter. 2.Press the power button and turn on the power bank mode.
1.If you failed to start your car, you need to disconnect the battery clamp from the vehicle and the jump starter.Please wait for at least 30 seconds,then try again. If you failed to start your car after 2 attempts,you can use the force start function. 2.Force start function.First please make sure that the clamps are connected to the correct polarity battery terminals.Then, press and hold the force start button for 3 seconds.When the indicator light of the smart clamp is solid green, you need to start the vehicle within 30s.
1.Simultaneous chargirg and recharging is not supported. 2.Do NOT start the car engine while charging the jump starter. 3.Recommend to use 5V/2A wall charger to recharge the jump starter. Nate:It is recommended to recharge the jump starter avery 3-4 months to maintain the efficiency and prolong the service life of the intarnal battery even if tha unit has not been used.
Turn On:Short press the power switch for 1 seconds,all interface outputs areturned on. Press the power button twice in the power on state, the machine interface will enterthe normally open state,and will not automatically shut down. Shutdown: Short press the powerswitch for 3 seconds,all interface outputs are turned off. Short press the powerswitch and then short press the AC switch to turn on the AC output; Short press again to turn it off, or press and hold the power switch for 3 seconds to turn it off.
1.Use the AC charger to charge Step 1:Connect the AC connector of this product to the household AC outlet,and then connect the DCconnector to the DC input interface of this product. Step 2:When the display lights up,the "IN" symbol flashes and the power indicatorflashes in an incremental manner. lt will display the charging status and current power.When the power indicatorshowsfully the "IN" symbol is not flashing,it is fully charged.Please remove the charger in time. 2.Use solar panels to charge Step 1:Place the solar panel in a place where the sunlight is strong; Step 2:Please connect the output of the solar panel to the charging input of this product.When the power indicator of this productis on and flashing. it means that the product is normally charged.When all the powerindicators are on and stop flashing, it means that the product is fully charged.

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question
You have successfully subscribed!
coupon code:Welcome20
This email has been registered
-->